No Bottom Bucket
Material : HDPE/NYLON/UHMWPE
Features :
• Bottomless elevator Buckets for agricultural use.
• An assembly of several bottomless elevator buckets and one bucket with bottom is installed at a close spacing on the belt. This will allow materials to be conveyed continuously allowing larger capacity.
Capacity will increase 1.5~2 times by using bottomless elevator buckets. Bottomless elevator buckets can be used at higher discharge speed.
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc
Using Recommendations:
• Minimum bucket spacing: Buckets spacing in one group= “C” +1mm; Bucket spacing between the groups= Bucket Projection“B” Bucket Depth “C” +25mm.
• For engineering purposes, we recommend using “L” for usable capacity.
• Mounting holes can be customized on request.
Technical Specifications :
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.
• A direct replacement for many other international brands.
• Unique elevator bucket design with multiple patents.
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
Remark : Code 1 = low 4 = high
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.
Features :
• Bottomless elevator Buckets for agricultural use.
• An assembly of several bottomless elevator buckets and one bucket with bottom is installed at a close spacing on the belt. This will allow materials to be conveyed continuously allowing larger capacity.
Capacity will increase 1.5~2 times by using bottomless elevator buckets. Bottomless elevator buckets can be used at higher discharge speed.
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc
Using Recommendations:
• Minimum bucket spacing: Buckets spacing in one group= “C” +1mm; Bucket spacing between the groups= Bucket Projection“B” Bucket Depth “C” +25mm.
• For engineering purposes, we recommend using “L” for usable capacity.
• Mounting holes can be customized on request.
Technical Specifications :
Model | Bucket Dimension* (mm) | Mounting Holes (mm) | Capacity (L) | |||||
Length A | Proj. B | Depth C | Distance Down D | PCD E | Standard Punching Holes | Hole Diameter | ||
BB0706 | 72 | 62 | 30 | 14 | 30 | 2 | 6.5 | 0.08 |
BB1109 | 110 | 92 | 50 | 20 | 60 | 2 | 6.5 | 0.21 |
BB1109A | 110 | 92 | 45 | 22 | 60 | 2 | 6.5 | 0.25 |
BB0907 | 90 | 78 | 33 | 15 | 40 | 2 | 6.5 | 0.18 |
BB1310 | 130 | 102 | 45 | 20 | 70 | 2 | 6.5 | 0.36 |
BB1311 | 130 | 110 | 45 | 18 | 70 | 2 | 6.5 | 0.36 |
BB1812 | 186 | 125 | 60 | 25 | 90 | 2 | 8.5 | 0.85 |
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.
• A direct replacement for many other international brands.
• Unique elevator bucket design with multiple patents.
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
Material | HDPE | Nylon 6 | UHMWPE | PU | Mild Steel | Stainless |
Cost | 1 | 3 | 3 | 4 | 2 | 4 |
Wear Resistance | 1 | 2 | 3 | 4 | 3 | 4 |
Impact Resistance | 1 | 2 | 2 | 2 | 2 | 2 |
FDA Food Approved | Yes | Yes | Yes | No | No | No |
Max Temp¡æ Continuous | 70 | 100 | 70 | 60 | 180+ | 250+ |
Max Temp¡æ Peak | 80 | 120 | 80 | 70 | 220 | 400 |
Remark : Code 1 = low 4 = high
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.