Inductive Bucket
Material : PP/HDPE/NYLON/UHMWPE
Features :
• Specially designed for chain conveyors with horizontal product transmission.
• Commonly used where there is a high demand for low damage to products where conventional elevator will not work or where there will be dificulties with loading and discharge of products.
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc
Using Recommendations
• Dimension “G” is designed by referring to the conveyor chain pitch in the chain conveyors.
• Consult our engineer for the installation of LL buckets as various dimensions and figures are needed to be considered.
Technical Specifications :
Model | Bucket Dimension* (mm) | Capacity (L) | ||||||
Length A | Proj. B | Depth C | D | E | F | G | ||
IB2412 | 246 | 132 | 61 | / | 282 | 122 | 127 | 1.2 |
IB2619 | 260 | 190 | 78.5 | 341 | 309 | 190 | 190.5 | 2.34 |
IB3115 | 310 | 160 | 78 | / | 354 | 149 | 158.75 | 2.3 |
IB3219 | 330 | 200 | 78 | / | 373 | 173 | 190.5 | 3.19 |
IB3319 | 368 | 198 | 103 | 440 | 400 | 173 | 190.5 | 4 |
IB3821 | 384 | 213 | 125 | 480 | 430 | 195 | 203.5 | 4.8 |
IB3921 | 390 | 218 | 120 | / | / | / | / | 5.2 |
IB4013 | 406 | 133 | 69 | / | 430 | 110 | 127 | 2 |
IB6323 | 651 | 236 | 120 | 762 | 717 | 205 | 228.6 | 11 |
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.
• A direct replacement for many other international brands.
• Unique elevator bucket design with multiple patents.
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
Material | HDPE | Nylon 6 | UHMWPE | PU | Mild Steel | Stainless |
Cost | 1 | 3 | 3 | 4 | 2 | 4 |
Wear Resistance | 1 | 2 | 3 | 4 | 3 | 4 |
Impact Resistance | 1 | 2 | 2 | 2 | 2 | 2 |
FDA Food Approved | Yes | Yes | Yes | No | No | No |
Max Temp¡æ Continuous | 70 | 100 | 70 | 60 | 180+ | 250+ |
Max Temp¡æ Peak | 80 | 120 | 80 | 70 | 220 | 400 |
Remark : Code 1 = low 4 = high
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking,
now water absorption, light weight properties.Higher cost performance products.
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.